|
Things You'll Need: Piece of material 17 inches by 61/2 inches Two pieces of ribbon (or thin cord) 17 inches long Needle Thread Straight pins
Step 1 Fold the piece of material (with the backside facing out) in half lengthwise so that you have a bag measuring 8 1/2 inches in length by 6 1/2 inches wide. Step 2 Make sure that all sides match up evenly. Using the straight pins, pin the sides so that they are held in place. Step 3 Using the needle and thread, stitch the sides by hand approx. 1/8 inch from the edge. Leave 2 inches unstitched at the top. Step 4 On either end of the two tops of the material, stitch along the outer edges to help keep them from unraveling. Step 5 Once you have stitched both sides, fold the material at the top in half so that you have a fold 1 inch wide. Using straight pins, fasten the material in place so that you are able to stitch the inside edge (at the bottom of the fold) of the material. Make sure to start your stitch from the side facing you. Step 6 Once you have finished stitching, turn the bag inside out. Take one of the two pieces of ribbon and feed it through one side of the top (including both sides of the bag) so that you have both ends meeting on the opposite side. Knot the two ends together. Now take the other piece of ribbon and feed it through the opposite direction. Once both ends are through, knot those ends together as well. When you pull the knotted ribbons from both sides at the same time, the bag should close easily.
|